lpi_grb.c
Go to the documentation of this file.
37 /*--+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8----+----9----+----0----+----1----+----2*/
52 #if ( GRB_VERSION_MAJOR < 6 || ( GRB_VERSION_MAJOR == 7 && GRB_VERSION_MINOR == 0 && GRB_VERSION_TECHNICAL < 2 ) )
63 SCIPmessagePrintWarning((messagehdlr), "Gurobi error %d: %s\n", _restat_, GRBgeterrormsg(lpi->grbenv)); \
72 SCIPmessagePrintWarning((messagehdlr), "Gurobi error %d: %s\n", _restat_, GRBgeterrormsg((*lpi)->grbenv)); \
82 #define SCIP_DUALPACKETSIZE (sizeof(SCIP_DUALPACKET)*4) /**< each entry needs two bits of information */
84 typedef SCIP_DUALPACKET COLPACKET; /**< each column needs two bits of information (basic/on_lower/on_upper) */
86 typedef SCIP_DUALPACKET ROWPACKET; /**< each row needs two bit of information (basic/on_lower/on_upper) */
90 /* At several places we need to guarantee to have a factorization of an optimal basis and call the simplex to produce
91 * it. In a numerical perfect world, this should need no iterations. However, due to numerical inaccuracies after
93 #define GRB_REFACTORMAXITERS 50 /**< maximal number of iterations allowed for producing a refactorization of the basis */
169 SCIP_Real conditionlimit; /**< maximum condition number of LP basis counted as stable (-1.0: no limit) */
210 /* Global Gurobi environment in order to not create a new environment for each new LP. This is not thread safe. */
437 CHECK_ZERO( lpi->messagehdlr, GRBsetintattrarray(lpi->grbmodel, GRB_INT_ATTR_VBASIS, 0, ncols, lpi->cstat) );
438 CHECK_ZERO( lpi->messagehdlr, GRBsetintattrarray(lpi->grbmodel, GRB_INT_ATTR_CBASIS, 0, nrows, lpi->rstat) );
471 /* The basis information for Gurobi is negative. So we cannot use the functions in bitencode.h/c. The functions below are a modified copy. */
481 static const SCIP_DUALPACKET mask[SCIP_DUALPACKETSIZE][4] = { /* if the packet size changes, the mask has to be updated */
511 for( i = 0; i < nfull; i += (int)SCIP_DUALPACKETSIZE, inp += (int)SCIP_DUALPACKETSIZE ) /*lint !e679*/
668 SCIP_ALLOC( BMSallocBlockMemoryArray(blkmem, &(*lpistate)->packcstat, colpacketNum(ncols + nrngrows)) );
685 BMSfreeBlockMemoryArrayNull(blkmem, &(*lpistate)->packcstat, colpacketNum((*lpistate)->ncols + (*lpistate)->nrngrows));
713 CHECK_ZERO( lpi->messagehdlr, GRBgetintparam(lpi->grbenv, intparam[i], &(grbparam->intparval[i])) );
717 CHECK_ZERO( lpi->messagehdlr, GRBgetdblparam(lpi->grbenv, dblparam[i], &(grbparam->dblparval[i])) );
765 CHECK_ZERO( lpi->messagehdlr, GRBsetintparam(lpi->grbenv, intparam[i], lpi->curparam.intparval[i]) );
775 CHECK_ZERO( lpi->messagehdlr, GRBsetdblparam(lpi->grbenv, dblparam[i], lpi->curparam.dblparval[i]) );
1030 /** after restoring old LP data, need to resolve the LP to be able to retrieve correct information */
1039 CHECK_ZERO( lpi->messagehdlr, GRBsetintparam(lpi->grbenv, GRB_INT_PAR_METHOD, GRB_METHOD_DUAL) );
1046 /* modifying the LP, restoring the old LP, and loading the old basis is not enough for Gurobi to be able to return
1049 * In a numerical perfect world, GRB_REFACTORMAXITERS below should be zero. However, due to numerical inaccuracies
1054 SCIPmessagePrintWarning(lpi->messagehdlr, "Gurobi needed %d iterations to restore optimal basis.\n", (int) cnt);
1124 CHECK_ZERO( lpi->messagehdlr, GRBaddvar(lpi->grbmodel, 1, &row, &coeff, 0.0, 0.0, lpi->rngvals[i], GRB_CONTINUOUS, NULL) );
1287 int* intInfo /**< integrality array (0: continuous, 1: integer). May be NULL iff ncols is 0. */
1342 assert(sizeof(SCIP_Real) == sizeof(double)); /*lint !e506*/ /* Gurobi only works with doubles as floating points */
1343 assert(sizeof(SCIP_Bool) == sizeof(int)); /*lint !e506*/ /* Gurobi only works with ints as bools */
1371 SCIPmessagePrintWarning(messagehdlr, "Gurobi error %d: Something went wrong with creating the environment.\n", restat);
1383 CHECK_ZERO_STAR( messagehdlr, GRBnewmodel(reusegrbenv, &(*lpi)->grbmodel, name, 0, NULL, NULL, NULL, NULL, NULL) );
1391 /* Create new environment for each new instaniation; note that this involves additional work and
1402 CHECK_ZERO_STAR( messagehdlr, GRBnewmodel((*lpi)->grbenv, &(*lpi)->grbmodel, name, 0, NULL, NULL, NULL, NULL, NULL) );
1576 CHECK_ZERO( lpi->messagehdlr, GRBloadmodel(lpi->grbenv, &(lpi->grbmodel), NULL, ncols, nrows, grbobjsen, 0.0, (SCIP_Real*)obj,
1577 lpi->senarray, lpi->rhsarray, (int*)beg, cnt, (int*)ind, (SCIP_Real*)val, (SCIP_Real*)lb, (SCIP_Real*)ub, NULL, colnames, rownames) );
1619 const int* beg, /**< start index of each column in ind- and val-array, or NULL if nnonz == 0 */
1659 /**@todo Save and restore basis - currently, the basis is destroyed if we discard (and later re-add) range variables */
1664 CHECK_ZERO( lpi->messagehdlr, GRBaddvars(lpi->grbmodel, ncols, nnonz, (int*)beg, (int*)ind, (SCIP_Real*)val,
1716 /** deletes columns from LP; the new position of a column must not be greater that its old position */
1825 CHECK_ZERO( lpi->messagehdlr, GRBaddconstrs(lpi->grbmodel, nrows, nnonz, (int*)beg, (int*)ind, (SCIP_Real*)val, lpi->senarray, lpi->rhsarray, rownames) );
1923 /* For simplicity, just delete all range variables from Gurobi LP - it would suffice to only delete those
1949 /** deletes rows from SCIP_LP; the new position of a row must not be greater that its old position */
2082 CHECK_ZERO( lpi->messagehdlr, GRBnewmodel(lpi->grbenv, &(lpi->grbmodel), "", 0, NULL, NULL, NULL, NULL, NULL) );
2131 CHECK_ZERO( lpi->messagehdlr, GRBsetdblattrlist(lpi->grbmodel, GRB_DBL_ATTR_LB, ncols, (int*)ind, (SCIP_Real*)lb) );
2132 CHECK_ZERO( lpi->messagehdlr, GRBsetdblattrlist(lpi->grbmodel, GRB_DBL_ATTR_UB, ncols, (int*)ind, (SCIP_Real*)ub) );
2167 CHECK_ZERO( lpi->messagehdlr, GRBsetdblattrlist(lpi->grbmodel, GRB_DBL_ATTR_RHS, nrows, (int*)ind, lpi->rhsarray) );
2168 CHECK_ZERO( lpi->messagehdlr, GRBsetcharattrlist(lpi->grbmodel, GRB_CHAR_ATTR_SENSE, nrows, (int*)ind, lpi->senarray) );
2205 CHECK_ZERO( lpi->messagehdlr, GRBsetdblattrelement(lpi->grbmodel, GRB_DBL_ATTR_UB, ncols+rngrowidx, lpi->rngvals[rngrowidx]) );
2240 /**@todo Save and restore basis - currently, the basis is destroyed if we discard (and later re-add) range variables */
2288 SCIPdebugMessage("changing coefficient row %d, column %d in Gurobi to %g\n", row, col, newval);
2318 CHECK_ZERO( lpi->messagehdlr, GRBsetintattr(lpi->grbmodel, GRB_INT_ATTR_MODELSENSE, grbobjsen) );
2341 CHECK_ZERO( lpi->messagehdlr, GRBsetdblattrlist(lpi->grbmodel, GRB_DBL_ATTR_OBJ, ncols, (int*)ind, (SCIP_Real*)obj) );
2347 /** multiplies a row with a non-zero scalar; for negative scalars, the row's sense is switched accordingly */
2373 SCIP_CALL( SCIPlpiGetRows(lpi, row, row, &lhs, &rhs, &nnonz, &beg, lpi->indarray, lpi->valarray) );
2404 /** multiplies a column with a non-zero scalar; the objective value is multiplied with the scalar, and the bounds
2433 SCIP_CALL( SCIPlpiGetCols(lpi, col, col, &lb, &ub, &nnonz, &beg, lpi->indarray, lpi->valarray) );
2542 /** gets columns from LP problem object; the arrays have to be large enough to store all values;
2561 assert((nnonz != NULL && beg != NULL && ind != NULL && val != NULL) || (nnonz == NULL && beg == NULL && ind == NULL && val == NULL));
2574 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_LB, firstcol, lastcol-firstcol+1, lb) );
2575 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_UB, firstcol, lastcol-firstcol+1, ub) );
2581 CHECK_ZERO( lpi->messagehdlr, GRBgetvars(lpi->grbmodel, nnonz, beg, ind, val, firstcol, lastcol-firstcol+1) );
2606 assert((nnonz != NULL && beg != NULL && ind != NULL && val != NULL) || (nnonz == NULL && beg == NULL && ind == NULL && val == NULL));
2622 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_RHS, firstrow, lastrow-firstrow+1, lpi->rhsarray) );
2623 CHECK_ZERO( lpi->messagehdlr, GRBgetcharattrarray(lpi->grbmodel, GRB_CHAR_ATTR_SENSE, firstrow, lastrow-firstrow+1, lpi->senarray) );
2634 CHECK_ZERO( lpi->messagehdlr, GRBgetconstrs(lpi->grbmodel, nnonz, beg, ind, val, firstrow, lastrow-firstrow+1) );
2669 memmove(&ind[newnz], &ind[thebeg], ((size_t) (theend - thebeg)) * sizeof(*ind)); /*lint !e776 !e571*/
2670 memmove(&val[newnz], &val[thebeg], ((size_t) (theend - thebeg)) * sizeof(*val)); /*lint !e776 !e571*/
2688 char** colnames, /**< pointers to column names (of size at least lastcol-firstcol+1) or NULL if namestoragesize is zero */
2690 int namestoragesize, /**< size of namestorage (if 0, storageleft returns the storage needed) */
2691 int* storageleft /**< amount of storage left (if < 0 the namestorage was not big enough) or NULL if namestoragesize is zero */
2710 char** rownames, /**< pointers to row names (of size at least lastrow-firstrow+1) or NULL if namestoragesize is zero */
2712 int namestoragesize, /**< size of namestorage (if 0, -storageleft returns the storage needed) */
2713 int* storageleft /**< amount of storage left (if < 0 the namestorage was not big enough) or NULL if namestoragesize is zero */
2741 CHECK_ZERO( lpi->messagehdlr, GRBgetintattr(lpi->grbmodel, GRB_INT_ATTR_MODELSENSE, &grbobjsen) );
2764 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_OBJ, firstcol, lastcol-firstcol+1, vals) );
2792 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_LB, firstcol, lastcol-firstcol+1, lbs) );
2797 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_UB, firstcol, lastcol-firstcol+1, ubs) );
2821 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_RHS, firstrow, lastrow-firstrow+1, lpi->rhsarray) );
2822 CHECK_ZERO( lpi->messagehdlr, GRBgetcharattrarray(lpi->grbmodel, GRB_CHAR_ATTR_SENSE, firstrow, lastrow-firstrow+1, lpi->senarray) );
2896 CHECK_ZERO( lpi->messagehdlr, GRBsetintparam(lpi->grbenv, GRB_INT_PAR_METHOD, GRB_METHOD_PRIMAL) );
2919 CHECK_ZERO( lpi->messagehdlr, GRBgetintattr(lpi->grbmodel, GRB_INT_ATTR_STATUS, &lpi->solstat) );
2921 SCIPdebugMessage("Gurobi primal simplex needed %d iterations to gain LP status %d\n", (int) cnt, lpi->solstat);
2923 /* maybe the preprocessor solved the problem; but we need a solution, so solve again without preprocessing */
2933 SCIPdebugMessage("presolver may have solved the problem -> calling Gurobi primal simplex again without presolve\n");
2936 CHECK_ZERO( lpi->messagehdlr, GRBsetintparam(lpi->grbenv, GRB_INT_PAR_PRESOLVE, GRB_PRESOLVE_OFF) );
2951 CHECK_ZERO( lpi->messagehdlr, GRBgetintattr(lpi->grbmodel, GRB_INT_ATTR_STATUS, &lpi->solstat) );
2952 SCIPdebugMessage(" -> Gurobi returned solstat=%d (%d iterations)\n", lpi->solstat, lpi->iterations);
2961 SCIPerrorMessage("Gurobi primal simplex returned GRB_INF_OR_UNBD after presolving was turned off\n");
2967 /* Unbounded means that there exists an unbounded primal ray. However, this does not state whether the problem is
2981 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_OBJ, 0, ncols, objcoefs) );
2984 CHECK_ZERO( lpi->messagehdlr, GRBsetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_OBJ, 0, ncols, zeroobjcoefs) );
2987 CHECK_ZERO( lpi->messagehdlr, GRBgetdblparam(lpi->grbenv, GRB_DBL_PAR_CUTOFF, &oldobjcutoff) );
2989 CHECK_ZERO( lpi->messagehdlr, GRBgetintattr(lpi->grbmodel, GRB_INT_ATTR_MODELSENSE, &grbobjsen) );
2996 CHECK_ZERO( lpi->messagehdlr, GRBsetdblparam(lpi->grbenv, GRB_DBL_PAR_CUTOFF, -GRB_INFINITY) );
3010 CHECK_ZERO( lpi->messagehdlr, GRBsetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_OBJ, 0, ncols, objcoefs) );
3039 /* GRB_LOADED, GRB_NODE_LIMIT, GRB_CUTOFF, GRB_SOLUTION_LIMIT, GRB_INTERRUPTED, GRB_NUMERIC, GRB_SUBOPTIMAL, GRB_INPROGRESS, GRB_USER_OBJ_LIMIT */
3090 CHECK_ZERO( lpi->messagehdlr, GRBsetintparam(lpi->grbenv, GRB_INT_PAR_METHOD, GRB_METHOD_DUAL) );
3102 CHECK_ZERO( lpi->messagehdlr, GRBgetintparam(lpi->grbenv, "GURO_PAR_PRIMDUALSWITCH", &oldprimdual) );
3110 CHECK_ZERO( lpi->messagehdlr, GRBgetintparam(lpi->grbenv, GRB_INT_PAR_PRESOLVE, &oldpresolve) );
3113 CHECK_ZERO( lpi->messagehdlr, GRBsetintparam(lpi->grbenv, GRB_INT_PAR_PRESOLVE, GRB_PRESOLVE_OFF) );
3132 CHECK_ZERO( lpi->messagehdlr, GRBgetintattr(lpi->grbmodel, GRB_INT_ATTR_STATUS, &lpi->solstat) );
3134 SCIPdebugMessage("Gurobi dual simplex needed %d iterations to gain LP status %d\n", (int) cnt, lpi->solstat);
3143 /* maybe the preprocessor solved the problem; but we need a solution, so solve again without preprocessing */
3144 SCIPdebugMessage("presolver may have solved the problem -> calling Gurobi dual simplex again without presolve\n");
3147 CHECK_ZERO( lpi->messagehdlr, GRBsetintattr(lpi->grbmodel, GRB_INT_PAR_PRESOLVE, GRB_PRESOLVE_OFF) );
3163 CHECK_ZERO( lpi->messagehdlr, GRBgetintattr(lpi->grbmodel, GRB_INT_ATTR_STATUS, &lpi->solstat) );
3164 SCIPdebugMessage(" -> Gurobi returned solstat=%d (%d iterations)\n", lpi->solstat, lpi->iterations);
3167 CHECK_ZERO( lpi->messagehdlr, GRBsetintattr(lpi->grbmodel, GRB_INT_PAR_PRESOLVE, GRB_PRESOLVE_AUTO) );
3173 SCIPerrorMessage("Gurobi dual simplex returned GRB_INF_OR_UNBD after presolving was turned off.\n");
3183 CHECK_ZERO( lpi->messagehdlr, GRBsetintparam(lpi->grbenv, "GURO_PAR_PRIMDUALSWITCH", oldprimdual) );
3187 CHECK_ZERO( lpi->messagehdlr, GRBsetintparam(lpi->grbenv, GRB_INT_PAR_PRESOLVE, oldpresolve) );
3193 /** calls barrier or interior point algorithm to solve the LP with crossover to simplex basis */
3238 CHECK_ZERO( lpi->messagehdlr, GRBsetintparam(lpi->grbenv, GRB_INT_PAR_METHOD, GRB_METHOD_BARRIER) );
3261 CHECK_ZERO( lpi->messagehdlr, GRBgetintattr(lpi->grbmodel, GRB_INT_ATTR_STATUS, &lpi->solstat) );
3263 SCIPdebugMessage("Gurobi barrier needed %d iterations to gain LP status %d\n", (int) cnt, lpi->solstat);
3272 /* maybe the preprocessor solved the problem; but we need a solution, so solve again without preprocessing */
3273 SCIPdebugMessage("presolver may have solved the problem -> calling Gurobi barrier again without presolve\n");
3276 CHECK_ZERO( lpi->messagehdlr, GRBsetintattr(lpi->grbmodel, GRB_INT_PAR_PRESOLVE, GRB_PRESOLVE_OFF) );
3292 CHECK_ZERO( lpi->messagehdlr, GRBgetintattr(lpi->grbmodel, GRB_INT_ATTR_STATUS, &lpi->solstat) );
3293 SCIPdebugMessage(" -> Gurobi returned solstat=%d (%d iterations)\n", lpi->solstat, lpi->iterations);
3296 CHECK_ZERO( lpi->messagehdlr, GRBsetintattr(lpi->grbmodel, GRB_INT_PAR_PRESOLVE, GRB_PRESOLVE_AUTO) );
3382 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrelement(lpi->grbmodel, GRB_DBL_ATTR_LB, col, &oldlb) );
3383 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrelement(lpi->grbmodel, GRB_DBL_ATTR_UB, col, &oldub) );
3407 SCIPdebugMessage("strong branching down (%g) on x%d (%g) with %d iterations\n", newub, col, psol, itlim);
3409 CHECK_ZERO( lpi->messagehdlr, GRBsetdblattrelement(lpi->grbmodel, GRB_DBL_ATTR_UB, col, newub) );
3432 CHECK_ZERO( lpi->messagehdlr, GRBsetdblattrelement(lpi->grbmodel, GRB_DBL_ATTR_UB, col, oldub) );
3459 SCIPdebugMessage("strong branching up (%g) on x%d (%g) with %d iterations\n", newlb, col, psol, itlim);
3461 CHECK_ZERO( lpi->messagehdlr, GRBsetdblattrelement(lpi->grbmodel, GRB_DBL_ATTR_LB, col, newlb) );
3484 CHECK_ZERO( lpi->messagehdlr, GRBsetdblattrelement(lpi->grbmodel, GRB_DBL_ATTR_LB, col, oldlb) );
3574 SCIP_CALL( lpiStrongbranch(lpi, cols[j], psols[j], itlim, &(down[j]), &(up[j]), &(downvalid[j]), &(upvalid[j]), iter) );
3637 SCIP_CALL( lpiStrongbranch(lpi, cols[j], psols[j], itlim, &(down[j]), &(up[j]), &(downvalid[j]), &(upvalid[j]), iter) );
3668 * The feasibility information is with respect to the last solving call and it is only relevant if SCIPlpiWasSolved()
3671 * Note that @a primalfeasible and @a dualfeasible should only return true if the solver has proved the respective LP to
3672 * be feasible. Thus, the return values should be equal to the values of SCIPlpiIsPrimalFeasible() and
3673 * SCIPlpiIsDualFeasible(), respectively. Note that if feasibility cannot be proved, they should return false (even if
3697 /** returns TRUE iff LP is proven to have a primal unbounded ray (but not necessary a primal feasible point);
3711 /** returns TRUE iff LP is proven to have a primal unbounded ray (but not necessary a primal feasible point),
3756 /* GRB_UNBOUNDED means that there exists a primal ray. SCIPlpiSolvePrimal() will determine whether the problem is
3757 * actually infeasible or (feasible and) unbounded. In the latter case, the status will be GRB_UNBOUNDED.
3820 /* If Gurobi cannot return the constraint violation, there is no feasible solution available. */
3837 /** returns TRUE iff LP is proven to have a dual unbounded ray (but not necessary a dual feasible point);
3851 /** returns TRUE iff LP is proven to have a dual unbounded ray (but not necessary a dual feasible point),
3956 * This function should return true if the solution is reliable, i.e., feasible and optimal (or proven
3957 * infeasible/unbounded) with respect to the original problem. The optimality status might be with respect to a scaled
3958 * version of the problem, but the solution might not be feasible to the unscaled original problem; in this case,
3978 /* If the condition number of the basis should be checked, everything above the specified threshold is counted as
3992 /* if the kappa could not be computed (e.g., because we do not have a basis), we cannot check the condition */
4087 /** tries to reset the internal status of the LP solver in order to ignore an instability of the last solving call */
4133 /* return minus infinity if value not available and we reached the iteration limit (see lpi_cpx) */
4142 /* if we reached the cutoff, then OBJBOUND seems to be -infinity; we set the value to the cutoff in this case */
4147 /**@todo The following is some kind of hack which works with the current SCIP implementation and should be fixed. In
4148 * the case that the LP status is GRB_CUTOFF it might be that certain attributes cannot be queried (e.g., objval,
4149 * primal and dual solution), in this case we just return the installed cutoff value minus some epsilon. This is some
4150 * kind of hack for the code in conflict.c:7595 were some extra code handles CPLEX' FASTMIP case that is similar to
4171 * Before calling this function, the caller must ensure that the LP has been solved to optimality, i.e., that
4203 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_X, 0, ncols, primsol) );
4208 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_PI, 0, nrows, dualsol) );
4216 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_SLACK, 0, nrows, activity) );
4220 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_RHS, 0, nrows, lpi->rhsarray) );
4221 CHECK_ZERO( lpi->messagehdlr, GRBgetcharattrarray(lpi->grbmodel, GRB_CHAR_ATTR_SENSE, 0, nrows, lpi->senarray) );
4233 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrelement(lpi->grbmodel, GRB_DBL_ATTR_X, ncols + lpi->rngrowmap[i], &solval) );
4257 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_RC, 0, ncols, redcost) );
4281 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_UNBDRAY, 0, ncols, ray) );
4305 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_FARKASDUAL, 0, nrows, dualfarkas) );
4331 * Such information is usually only available, if also a (maybe not optimal) solution is available.
4332 * The LPI should return SCIP_INVALID for @p quality, if the requested quantity is not available.
4383 /** gets current basis status for columns and rows; arrays must be large enough to store the basis status */
4407 CHECK_ZERO( lpi->messagehdlr, GRBgetintattrarray(lpi->grbmodel, GRB_INT_ATTR_CBASIS, 0, nrows, rstat) );
4408 CHECK_ZERO( lpi->messagehdlr, GRBgetcharattrarray(lpi->grbmodel, GRB_CHAR_ATTR_SENSE, 0, nrows, lpi->senarray) );
4419 CHECK_ZERO( lpi->messagehdlr, GRBgetintattrelement(lpi->grbmodel, GRB_INT_ATTR_VBASIS, idx, &rstat[i]) );
4478 CHECK_ZERO( lpi->messagehdlr, GRBgetintattrarray(lpi->grbmodel, GRB_INT_ATTR_VBASIS, 0, ncols, cstat) );
4567 CHECK_ZERO( lpi->messagehdlr, GRBgetcharattrarray(lpi->grbmodel, GRB_CHAR_ATTR_SENSE, i, 1, &sense) );
4579 CHECK_ZERO( lpi->messagehdlr, GRBgetcharattrarray(lpi->grbmodel, GRB_CHAR_ATTR_SENSE, i, 1, &sense) );
4626 CHECK_ZERO( lpi->messagehdlr, GRBsetintattrarray(lpi->grbmodel, GRB_INT_ATTR_CBASIS, 0, nrows, lpi->rstat) );
4627 CHECK_ZERO( lpi->messagehdlr, GRBsetintattrarray(lpi->grbmodel, GRB_INT_ATTR_VBASIS, 0, ncols+lpi->nrngrows, lpi->cstat) );
4632 /** returns the indices of the basic columns and rows; basic column n gives value n, basic row m gives value -1-m */
4697 * @note The LP interface defines slack variables to have coefficient +1. This means that if, internally, the LP solver
4698 * uses a -1 coefficient, then rows associated with slacks variables whose coefficient is -1, should be negated;
4795 * @note The LP interface defines slack variables to have coefficient +1. This means that if, internally, the LP solver
4796 * uses a -1 coefficient, then rows associated with slacks variables whose coefficient is -1, should be negated;
4855 /* get basis indices: entries that correspond to slack variables with coefficient -1 must be negated */
4904 * @note The LP interface defines slack variables to have coefficient +1. This means that if, internally, the LP solver
4905 * uses a -1 coefficient, then rows associated with slacks variables whose coefficient is -1, should be negated;
4913 const SCIP_Real* binvrow, /**< row in (A_B)^-1 from prior call to SCIPlpiGetBInvRow(), or NULL */
4950 /* get basis indices, temporarily using memory of x.ind: if r corresponds to a slack variable with coefficient -1 we
4969 /* Copy sparse solution: Column indices ngrbcols and larger correspond to slack variables artificially introduced
4970 * by Gurobi; column indices ncols, ncols+1, ..., ngrbcols-1 correspond to slack variables introduced by the LPI
5017 * @note The LP interface defines slack variables to have coefficient +1. This means that if, internally, the LP solver
5018 * uses a -1 coefficient, then rows associated with slacks variables whose coefficient is -1, should be negated;
5061 /* get basis indices: entries that correspond to slack variables with coefficient -1 must be negated */
5167 /* In this case no basis information is available. Since SCIP expects the information to work in any case, we
5168 * allocate the lpistate, but do not use the packed information. This might happen if the model is infeasible,
5181 /** loads LPi state (like basis information) into solver; note that the LP might have been extended with additional
5208 SCIPdebugMessage("loading LPI state %p (%d cols, %d rows, %d ranged rows) into Gurobi LP with %d cols, %d rows, and %d ranged rows\n",
5209 (void*) lpistate, lpistate->ncols, lpistate->nrows, lpistate->nrngrows, ncols, nrows, lpi->nrngrows);
5224 memmove(&lpi->cstat[ncols], &lpi->cstat[lpistate->ncols], (size_t) lpistate->nrngrows * sizeof(*lpi->cstat)); /*lint !e571*/
5311 if ( l > 4 && fname[l-4] == '.' && fname[l-3] == 'b' && fname[l-2] == 'a' && fname[l-1] == 's' )
5340 if ( l > 4 && fname[l-4] == '.' && fname[l-3] == 'b' && fname[l-2] == 'a' && fname[l-1] == 's' )
5391 /* if there is no basis information available (e.g. after barrier without crossover), norms cannot be saved */
5400 CHECK_ZERO( lpi->messagehdlr, GRBgetintattr(lpi->grbmodel, GRB_INT_ATTR_HASDUALNORM, &hasnorm) );
5415 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_VDUALNORM, 0, ncols, (*lpinorms)->colnorm) );
5416 CHECK_ZERO( lpi->messagehdlr, GRBgetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_CDUALNORM, 0, nrows, (*lpinorms)->rownorm) );
5421 /** loads LPi pricing norms into solver; note that the LP might have been extended with additional
5440 error = GRBsetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_VDUALNORM, 0, lpinorms->ncols, lpinorms->colnorm);
5447 SCIPmessagePrintWarning(lpi->messagehdlr, "Warning: setting dual variable norms failed with Gurobi error %d\n", error);
5452 error = GRBsetdblattrarray(lpi->grbmodel, GRB_DBL_ATTR_CDUALNORM, 0, lpinorms->nrows, lpinorms->rownorm);
5459 SCIPmessagePrintWarning(lpi->messagehdlr, "Warning: setting dual constraint norms failed with Gurobi error %d\n", error);
5533 assert( temp == GRB_PRESOLVE_AUTO || temp == GRB_PRESOLVE_OFF || temp == GRB_PRESOLVE_CONSERVATIVE || temp == GRB_PRESOLVE_AGGRESSIVE );
static SCIP_RETCODE setParameterValues(SCIP_LPI *lpi, GRBPARAM *grbparam)
Definition: lpi_grb.c:745
SCIP_RETCODE SCIPlpiGetBInvCol(SCIP_LPI *lpi, int c, SCIP_Real *coef, int *inds, int *ninds)
Definition: lpi_grb.c:4801
#define BMSfreeBlockMemoryArrayNull(mem, ptr, num)
Definition: memory.h:470
static SCIP_RETCODE getDblParam(SCIP_LPI *lpi, const char *param, double *p)
Definition: lpi_grb.c:851
Definition: type_lpi.h:67
SCIP_RETCODE SCIPlpiSetState(SCIP_LPI *lpi, BMS_BLKMEM *blkmem, const SCIP_LPISTATE *lpistate)
Definition: lpi_grb.c:5184
SCIP_Bool SCIPlpiIsInfinity(SCIP_LPI *lpi, SCIP_Real val)
Definition: lpi_grb.c:5810
Definition: type_lpi.h:69
SCIP_RETCODE SCIPlpiSetNorms(SCIP_LPI *lpi, BMS_BLKMEM *blkmem, const SCIP_LPINORMS *lpinorms)
Definition: lpi_grb.c:5424
static void lpistateUnpack(const SCIP_LPISTATE *lpistate, int *cstat, int *rstat)
Definition: lpi_grb.c:638
SCIP_RETCODE SCIPlpiGetDualfarkas(SCIP_LPI *lpi, SCIP_Real *dualfarkas)
Definition: lpi_grb.c:4287
SCIP_RETCODE SCIPlpiStartStrongbranch(SCIP_LPI *lpi)
Definition: lpi_grb.c:3313
SCIP_RETCODE SCIPlpiGetSol(SCIP_LPI *lpi, SCIP_Real *objval, SCIP_Real *primsol, SCIP_Real *dualsol, SCIP_Real *activity, SCIP_Real *redcost)
Definition: lpi_grb.c:4174
SCIP_RETCODE SCIPlpiSetIntpar(SCIP_LPI *lpi, SCIP_LPPARAM type, int ival)
Definition: lpi_grb.c:5566
SCIP_RETCODE SCIPlpiGetBase(SCIP_LPI *lpi, int *cstat, int *rstat)
Definition: lpi_grb.c:4384
Definition: type_lpi.h:50
SCIP_RETCODE SCIPlpiChgSides(SCIP_LPI *lpi, int nrows, const int *ind, const SCIP_Real *lhs, const SCIP_Real *rhs)
Definition: lpi_grb.c:2142
static SCIP_RETCODE ensureRngrowmapMem(SCIP_LPI *lpi, int num)
Definition: lpi_grb.c:315
SCIP_RETCODE SCIPlpiGetIntpar(SCIP_LPI *lpi, SCIP_LPPARAM type, int *ival)
Definition: lpi_grb.c:5500
interface methods for specific LP solvers
SCIP_RETCODE SCIPlpiGetIterations(SCIP_LPI *lpi, int *iterations)
Definition: lpi_grb.c:4315
Definition: type_lpi.h:60
Definition: type_lpi.h:84
static void lpistateFree(SCIP_LPISTATE **lpistate, BMS_BLKMEM *blkmem)
Definition: lpi_grb.c:676
Definition: struct_message.h:45
Definition: type_lpi.h:101
SCIP_RETCODE SCIPlpiSetRealpar(SCIP_LPI *lpi, SCIP_LPPARAM type, SCIP_Real dval)
Definition: lpi_grb.c:5702
SCIP_RETCODE SCIPlpiGetNorms(SCIP_LPI *lpi, BMS_BLKMEM *blkmem, SCIP_LPINORMS **lpinorms)
Definition: lpi_grb.c:5374
static void lpistatePack(SCIP_LPISTATE *lpistate, const int *cstat, const int *rstat)
Definition: lpi_grb.c:622
static SCIP_RETCODE setDblParam(SCIP_LPI *lpi, const char *param, double parval)
Definition: lpi_grb.c:876
SCIP_RETCODE SCIPlpiReadState(SCIP_LPI *lpi, const char *fname)
Definition: lpi_grb.c:5296
Definition: type_lpi.h:59
SCIP_RETCODE SCIPlpiGetBounds(SCIP_LPI *lpi, int firstcol, int lastcol, SCIP_Real *lbs, SCIP_Real *ubs)
Definition: lpi_grb.c:2770
SCIP_RETCODE SCIPlpiGetRealSolQuality(SCIP_LPI *lpi, SCIP_LPSOLQUALITY qualityindicator, SCIP_Real *quality)
Definition: lpi_grb.c:4334
SCIP_RETCODE SCIPlpiScaleCol(SCIP_LPI *lpi, int col, SCIP_Real scaleval)
Definition: lpi_grb.c:2407
SCIP_RETCODE SCIPlpiGetObjsen(SCIP_LPI *lpi, SCIP_OBJSEN *objsen)
Definition: lpi_grb.c:2728
SCIP_RETCODE SCIPlpiSetIntegralityInformation(SCIP_LPI *lpi, int ncols, int *intInfo)
Definition: lpi_grb.c:1284
SCIP_RETCODE SCIPlpiGetCols(SCIP_LPI *lpi, int firstcol, int lastcol, SCIP_Real *lb, SCIP_Real *ub, int *nnonz, int *beg, int *ind, SCIP_Real *val)
Definition: lpi_grb.c:2546
SCIP_RETCODE SCIPlpiCreate(SCIP_LPI **lpi, SCIP_MESSAGEHDLR *messagehdlr, const char *name, SCIP_OBJSEN objsen)
Definition: lpi_grb.c:1335
SCIP_RETCODE SCIPlpiGetBInvARow(SCIP_LPI *lpi, int r, const SCIP_Real *binvrow, SCIP_Real *coef, int *inds, int *ninds)
Definition: lpi_grb.c:4910
SCIP_RETCODE SCIPlpiAddCols(SCIP_LPI *lpi, int ncols, const SCIP_Real *obj, const SCIP_Real *lb, const SCIP_Real *ub, char **colnames, int nnonz, const int *beg, const int *ind, const SCIP_Real *val)
Definition: lpi_grb.c:1611
static SCIP_RETCODE setIntParam(SCIP_LPI *lpi, const char *param, int parval)
Definition: lpi_grb.c:826
Definition: lpi_cpx.c:197
Definition: type_lpi.h:61
Definition: type_lpi.h:82
SCIP_RETCODE SCIPlpiAddRows(SCIP_LPI *lpi, int nrows, const SCIP_Real *lhs, const SCIP_Real *rhs, char **rownames, int nnonz, const int *beg, const int *ind, const SCIP_Real *val)
Definition: lpi_grb.c:1772
SCIP_RETCODE SCIPlpiWriteLP(SCIP_LPI *lpi, const char *fname)
Definition: lpi_grb.c:5852
Definition: type_lpi.h:102
static SCIP_RETCODE getIntParam(SCIP_LPI *lpi, const char *param, int *p)
Definition: lpi_grb.c:801
SCIP_RETCODE SCIPlpiGetBasisInd(SCIP_LPI *lpi, int *bind)
Definition: lpi_grb.c:4633
SCIP_RETCODE SCIPlpiStrongbranchesFrac(SCIP_LPI *lpi, int *cols, int ncols, SCIP_Real *psols, int itlim, SCIP_Real *down, SCIP_Real *up, SCIP_Bool *downvalid, SCIP_Bool *upvalid, int *iter)
Definition: lpi_grb.c:3543
Definition: type_lpi.h:43
SCIP_RETCODE SCIPlpiFreeState(SCIP_LPI *lpi, BMS_BLKMEM *blkmem, SCIP_LPISTATE **lpistate)
Definition: lpi_grb.c:5269
SCIP_Bool SCIPlpiIsPrimalInfeasible(SCIP_LPI *lpi)
Definition: lpi_grb.c:3763
static SCIP_RETCODE reconvertSides(SCIP_LPI *lpi, int firstrow, int lastrow, SCIP_Real *lhs, SCIP_Real *rhs)
Definition: lpi_grb.c:969
Definition: type_lpi.h:53
SCIP_RETCODE SCIPlpiGetColNames(SCIP_LPI *lpi, int firstcol, int lastcol, char **colnames, char *namestorage, int namestoragesize, int *storageleft)
Definition: lpi_grb.c:2684
static SCIP_RETCODE presolve(SCIP *scip, SCIP_Bool *unbounded, SCIP_Bool *infeasible, SCIP_Bool *vanished)
Definition: scip_solve.c:1251
static SCIP_RETCODE convertSides(SCIP_LPI *lpi, int nrows, const SCIP_Real *lhs, const SCIP_Real *rhs, int *rngcount)
Definition: lpi_grb.c:911
SCIP_RETCODE SCIPlpiStrongbranchFrac(SCIP_LPI *lpi, int col, SCIP_Real psol, int itlim, SCIP_Real *down, SCIP_Real *up, SCIP_Bool *downvalid, SCIP_Bool *upvalid, int *iter)
Definition: lpi_grb.c:3520
void SCIPmessagePrintWarning(SCIP_MESSAGEHDLR *messagehdlr, const char *formatstr,...)
Definition: message.c:427
SCIP_RETCODE SCIPlpiStrongbranchesInt(SCIP_LPI *lpi, int *cols, int ncols, SCIP_Real *psols, int itlim, SCIP_Real *down, SCIP_Real *up, SCIP_Bool *downvalid, SCIP_Bool *upvalid, int *iter)
Definition: lpi_grb.c:3606
Definition: type_retcode.h:42
Definition: type_lpi.h:42
Definition: type_lpi.h:54
SCIP_RETCODE SCIPlpiGetSolFeasibility(SCIP_LPI *lpi, SCIP_Bool *primalfeasible, SCIP_Bool *dualfeasible)
Definition: lpi_grb.c:3676
Definition: type_retcode.h:55
Definition: type_lpi.h:62
SCIP_RETCODE SCIPlpiFreeNorms(SCIP_LPI *lpi, BMS_BLKMEM *blkmem, SCIP_LPINORMS **lpinorms)
Definition: lpi_grb.c:5468
SCIP_RETCODE SCIPlpiDelRows(SCIP_LPI *lpi, int firstrow, int lastrow)
Definition: lpi_grb.c:1851
Definition: type_lpi.h:80
static void SCIPencodeDualBitNeg(const int *inp, SCIP_DUALPACKET *out, int count)
Definition: lpi_grb.c:475
SCIP_RETCODE SCIPlpiGetObjval(SCIP_LPI *lpi, SCIP_Real *objval)
Definition: lpi_grb.c:4103
static SCIP_RETCODE checkParameterValues(SCIP_LPI *lpi)
Definition: lpi_grb.c:725
SCIP_Bool SCIPlpiHasStateBasis(SCIP_LPI *lpi, SCIP_LPISTATE *lpistate)
Definition: lpi_grb.c:5286
SCIP_RETCODE SCIPlpiDelCols(SCIP_LPI *lpi, int firstcol, int lastcol)
Definition: lpi_grb.c:1674
Definition: type_lpi.h:83
SCIP_RETCODE SCIPlpiWriteState(SCIP_LPI *lpi, const char *fname)
Definition: lpi_grb.c:5325
SCIP_RETCODE SCIPlpiChgCoef(SCIP_LPI *lpi, int row, int col, SCIP_Real newval)
Definition: lpi_grb.c:2278
SCIP_RETCODE SCIPlpiGetState(SCIP_LPI *lpi, BMS_BLKMEM *blkmem, SCIP_LPISTATE **lpistate)
Definition: lpi_grb.c:5121
Definition: type_lpi.h:79
SCIP_RETCODE SCIPlpiGetRowNames(SCIP_LPI *lpi, int firstrow, int lastrow, char **rownames, char *namestorage, int namestoragesize, int *storageleft)
Definition: lpi_grb.c:2706
static SCIP_RETCODE addRangeInfo(SCIP_LPI *lpi, int rngcount, int firstrow)
Definition: lpi_grb.c:1184
Definition: type_lpi.h:66
Definition: type_lpi.h:52
Definition: type_lpi.h:51
SCIP_RETCODE SCIPlpiSetBase(SCIP_LPI *lpi, const int *cstat, const int *rstat)
Definition: lpi_grb.c:4512
SCIP_RETCODE SCIPlpiChgBounds(SCIP_LPI *lpi, int ncols, const int *ind, const SCIP_Real *lb, const SCIP_Real *ub)
Definition: lpi_grb.c:2095
static SCIP_RETCODE lpiStrongbranch(SCIP_LPI *lpi, int col, SCIP_Real psol, int itlim, SCIP_Real *down, SCIP_Real *up, SCIP_Bool *downvalid, SCIP_Bool *upvalid, int *iter)
Definition: lpi_grb.c:3340
methods for sorting joint arrays of various types
SCIP_RETCODE SCIPlpiGetRows(SCIP_LPI *lpi, int firstrow, int lastrow, SCIP_Real *lhs, SCIP_Real *rhs, int *nnonz, int *beg, int *ind, SCIP_Real *val)
Definition: lpi_grb.c:2591
SCIP_RETCODE SCIPlpiStrongbranchInt(SCIP_LPI *lpi, int col, SCIP_Real psol, int itlim, SCIP_Real *down, SCIP_Real *up, SCIP_Bool *downvalid, SCIP_Bool *upvalid, int *iter)
Definition: lpi_grb.c:3583
Definition: type_lpi.h:56
SCIP_RETCODE SCIPlpiSolveBarrier(SCIP_LPI *lpi, SCIP_Bool crossover)
Definition: lpi_grb.c:3194
SCIP_RETCODE SCIPlpiGetPrimalRay(SCIP_LPI *lpi, SCIP_Real *ray)
Definition: lpi_grb.c:4264
static SCIP_RETCODE getParameterValues(SCIP_LPI *lpi, GRBPARAM *grbparam)
Definition: lpi_grb.c:698
SCIP_RETCODE SCIPlpiLoadColLP(SCIP_LPI *lpi, SCIP_OBJSEN objsen, int ncols, const SCIP_Real *obj, const SCIP_Real *lb, const SCIP_Real *ub, char **colnames, int nrows, const SCIP_Real *lhs, const SCIP_Real *rhs, char **rownames, int nnonz, const int *beg, const int *ind, const SCIP_Real *val)
Definition: lpi_grb.c:1510
Definition: type_retcode.h:49
Definition: lpi_clp.cpp:132
SCIP_RETCODE SCIPlpiScaleRow(SCIP_LPI *lpi, int row, SCIP_Real scaleval)
Definition: lpi_grb.c:2348
SCIP_RETCODE SCIPlpiGetSides(SCIP_LPI *lpi, int firstrow, int lastrow, SCIP_Real *lhss, SCIP_Real *rhss)
Definition: lpi_grb.c:2804
static void copyParameterValues(GRBPARAM *dest, const GRBPARAM *source)
Definition: lpi_grb.c:786
static SCIP_RETCODE lpistateCreate(SCIP_LPISTATE **lpistate, BMS_BLKMEM *blkmem, int ncols, int nrows, int nrngrows)
Definition: lpi_grb.c:654
public methods for message output
SCIP_RETCODE SCIPlpiGetBInvACol(SCIP_LPI *lpi, int c, SCIP_Real *coef, int *inds, int *ninds)
Definition: lpi_grb.c:5023
Definition: type_lpi.h:91
SCIP_RETCODE SCIPlpiGetObj(SCIP_LPI *lpi, int firstcol, int lastcol, SCIP_Real *vals)
Definition: lpi_grb.c:2750
Definition: type_lpi.h:81
Definition: lpi_clp.cpp:104
Definition: type_lpi.h:58
SCIP_RETCODE SCIPlpiChgObj(SCIP_LPI *lpi, int ncols, const int *ind, const SCIP_Real *obj)
Definition: lpi_grb.c:2325
static SCIP_RETCODE ensureSidechgMem(SCIP_LPI *lpi, int num)
Definition: lpi_grb.c:223
static SCIP_RETCODE ensureRngrowsMem(SCIP_LPI *lpi, int num)
Definition: lpi_grb.c:340
Definition: type_lpi.h:78
SCIP_RETCODE SCIPlpiInterrupt(SCIP_LPI *lpi, SCIP_Bool interrupt)
Definition: lpi_grb.c:5778
Definition: type_lpi.h:55
SCIP_RETCODE SCIPlpiGetCoef(SCIP_LPI *lpi, int row, int col, SCIP_Real *val)
Definition: lpi_grb.c:2831
Definition: type_lpi.h:92
Definition: type_retcode.h:44
Definition: type_retcode.h:52
SCIP_RETCODE SCIPlpiChgObjsen(SCIP_LPI *lpi, SCIP_OBJSEN objsen)
Definition: lpi_grb.c:2299
SCIP_RETCODE SCIPlpiGetBInvRow(SCIP_LPI *lpi, int r, SCIP_Real *coef, int *inds, int *ninds)
Definition: lpi_grb.c:4703
static void SCIPdecodeDualBitNeg(const SCIP_DUALPACKET *inp, int *out, int count)
Definition: lpi_grb.c:546
Definition: type_lpi.h:94
Definition: type_lpi.h:57
Definition: type_lpi.h:93
SCIP_RETCODE SCIPlpiIgnoreInstability(SCIP_LPI *lpi, SCIP_Bool *success)
Definition: lpi_grb.c:4088
SCIP_RETCODE SCIPlpiGetRealpar(SCIP_LPI *lpi, SCIP_LPPARAM type, SCIP_Real *dval)
Definition: lpi_grb.c:5659
void SCIPsortIntReal(int *intarray, SCIP_Real *realarray, int len)