scip_sol.h

Go to the documentation of this file.

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/*                                                                           */
/*                  This file is part of the program and library             */
/*         SCIP --- Solving Constraint Integer Programs                      */
/*                                                                           */
/*  Copyright (c) 2002-2024 Zuse Institute Berlin (ZIB)                      */
/*                                                                           */
/*  Licensed under the Apache License, Version 2.0 (the "License");          */
/*  you may not use this file except in compliance with the License.         */
/*  You may obtain a copy of the License at                                  */
/*                                                                           */
/*      http://www.apache.org/licenses/LICENSE-2.0                           */
/*                                                                           */
/*  Unless required by applicable law or agreed to in writing, software      */
/*  distributed under the License is distributed on an "AS IS" BASIS,        */
/*  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */
/*  See the License for the specific language governing permissions and      */
/*  limitations under the License.                                           */
/*                                                                           */
/*  You should have received a copy of the Apache-2.0 license                */
/*  along with SCIP; see the file LICENSE. If not visit scipopt.org.         */
/*                                                                           */
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

/**@file   scip_sol.h
 * @ingroup PUBLICCOREAPI
 * @brief  public methods for solutions
 * @author Tobias Achterberg
 * @author Timo Berthold
 * @author Thorsten Koch
 * @author Alexander Martin
 * @author Marc Pfetsch
 * @author Kati Wolter
 * @author Gregor Hendel
 * @author Leona Gottwald
 */

/*---+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8----+----9----+----0----+----1----+----2*/

#ifndef __SCIP_SCIP_SOL_H__
#define __SCIP_SCIP_SOL_H__


#include "scip/def.h"
#include "scip/type_cons.h"
#include "scip/type_heur.h"
#include "scip/type_retcode.h"
#include "scip/type_scip.h"
#include "scip/type_sol.h"
#include "scip/type_var.h"

#ifdef __cplusplus
extern "C" {
#endif

/**@addtogroup PublicSolutionMethods
 *
 * @{
 */

/** creates a primal solution, initialized to zero
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPcreateSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL**            sol,                /**< pointer to store the solution */
   SCIP_HEUR*            heur                /**< heuristic that found the solution (or NULL if it's from the tree) */
   );

/** creates a primal solution, initialized to the current LP solution
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPcreateLPSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL**            sol,                /**< pointer to store the solution */
   SCIP_HEUR*            heur                /**< heuristic that found the solution (or NULL if it's from the tree) */
   );

/** creates a primal solution, initialized to the current NLP solution
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPcreateNLPSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL**            sol,                /**< pointer to store the solution */
   SCIP_HEUR*            heur                /**< heuristic that found the solution (or NULL if it's from the tree) */
   );

/** creates a primal solution, initialized to the current relaxation solution
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPcreateRelaxSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL**            sol,                /**< pointer to store the solution */
   SCIP_HEUR*            heur                /**< heuristic that found the solution (or NULL if it's from the tree) */
   );

/** creates a primal solution, initialized to the current pseudo solution
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPcreatePseudoSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL**            sol,                /**< pointer to store the solution */
   SCIP_HEUR*            heur                /**< heuristic that found the solution (or NULL if it's from the tree) */
   );

/** creates a primal solution, initialized to the current LP or pseudo solution, depending on whether the LP was solved
 *  at the current node
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPcreateCurrentSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL**            sol,                /**< pointer to store the solution */
   SCIP_HEUR*            heur                /**< heuristic that found the solution (or NULL if it's from the tree) */
   );

/** creates a partial primal solution, initialized to unknown values
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 */
SCIP_EXPORT
SCIP_RETCODE SCIPcreatePartialSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL**            sol,                /**< pointer to store the solution */
   SCIP_HEUR*            heur                /**< heuristic that found the solution (or NULL if it's from the tree) */
   );

/** creates a primal solution, initialized to unknown values
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPcreateUnknownSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL**            sol,                /**< pointer to store the solution */
   SCIP_HEUR*            heur                /**< heuristic that found the solution (or NULL if it's from the tree) */
   );

/** creates a primal solution living in the original problem space, initialized to zero;
 *  a solution in original space allows to set original variables to values that would be invalid in the
 *  transformed problem due to preprocessing fixings or aggregations
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPcreateOrigSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL**            sol,                /**< pointer to store the solution */
   SCIP_HEUR*            heur                /**< heuristic that found the solution (or NULL if it's from the tree) */
   );

/** creates a copy of a primal solution; note that a copy of a linked solution is also linked and needs to be unlinked
 *  if it should stay unaffected from changes in the LP or pseudo solution
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPcreateSolCopy(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL**            sol,                /**< pointer to store the solution */
   SCIP_SOL*             sourcesol           /**< primal CIP solution to copy */
   );

/** creates a copy of a solution in the original primal solution space
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREETRANS
 */
SCIP_EXPORT
SCIP_RETCODE SCIPcreateSolCopyOrig(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL**            sol,                /**< pointer to store the solution */
   SCIP_SOL*             sourcesol           /**< primal CIP solution to copy */
   );

/** creates a copy of a primal solution, thereby replacing infinite fixings of variables by finite values;
 *  the copy is always defined in the original variable space;
 *  success indicates whether the objective value of the solution was changed by removing infinite values
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 */
SCIP_EXPORT
SCIP_RETCODE SCIPcreateFiniteSolCopy(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL**            sol,                /**< pointer to store the solution */
   SCIP_SOL*             sourcesol,          /**< primal CIP solution to copy */
   SCIP_Bool*            success             /**< does the finite solution have the same objective value? */
   );

/** frees primal CIP solution
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREETRANS
 */
SCIP_EXPORT
SCIP_RETCODE SCIPfreeSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL**            sol                 /**< pointer to the solution */
   );

/** links a primal solution to the current LP solution
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPlinkLPSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol                 /**< primal solution */
   );

/** links a primal solution to the current NLP solution
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPlinkNLPSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol                 /**< primal solution */
   );

/** links a primal solution to the current relaxation solution
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPlinkRelaxSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol                 /**< primal solution */
   );

/** links a primal solution to the current pseudo solution
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPlinkPseudoSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol                 /**< primal solution */
   );

/** links a primal solution to the current LP or pseudo solution
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPlinkCurrentSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol                 /**< primal solution */
   );

/** clears a primal solution
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREETRANS
 */
SCIP_EXPORT
SCIP_RETCODE SCIPclearSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol                 /**< primal solution */
   );

/** stores solution values of variables in solution's own array
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREETRANS
 */
SCIP_EXPORT
SCIP_RETCODE SCIPunlinkSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol                 /**< primal solution */
   );

/** sets value of variable in primal CIP solution
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREETRANS
 */
SCIP_EXPORT
SCIP_RETCODE SCIPsetSolVal(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal solution */
   SCIP_VAR*             var,                /**< variable to add to solution */
   SCIP_Real             val                 /**< solution value of variable */
   );

/** sets values of multiple variables in primal CIP solution
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREETRANS
 */
SCIP_EXPORT
SCIP_RETCODE SCIPsetSolVals(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal solution */
   int                   nvars,              /**< number of variables to set solution value for */
   SCIP_VAR**            vars,               /**< array with variables to add to solution */
   SCIP_Real*            vals                /**< array with solution values of variables */
   );

/** increases value of variable in primal CIP solution
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREETRANS
 */
SCIP_EXPORT
SCIP_RETCODE SCIPincSolVal(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal solution */
   SCIP_VAR*             var,                /**< variable to increase solution value for */
   SCIP_Real             incval              /**< increment for solution value of variable */
   );

/** returns value of variable in primal CIP solution, or in current LP/pseudo solution
 *
 *  @return value of variable in primal CIP solution, or in current LP/pseudo solution
 *
 *  @pre In case the solution pointer @p sol is @b NULL, that means it is asked for the LP or pseudo solution, this method
 *       can only be called if @p scip is in the solving stage \ref SCIP_STAGE_SOLVING. In any other case, this method
 *       can be called if @p scip is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREETRANS
 */
SCIP_EXPORT
SCIP_Real SCIPgetSolVal(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal solution, or NULL for current LP/pseudo solution */
   SCIP_VAR*             var                 /**< variable to get value for */
   );

/** gets values of multiple variables in primal CIP solution
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREETRANS
 */
SCIP_EXPORT
SCIP_RETCODE SCIPgetSolVals(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal solution, or NULL for current LP/pseudo solution */
   int                   nvars,              /**< number of variables to get solution value for */
   SCIP_VAR**            vars,               /**< array with variables to get value for */
   SCIP_Real*            vals                /**< array to store solution values of variables */
   );

/** returns objective value of primal CIP solution w.r.t. original problem, or current LP/pseudo objective value
 *
 *  @return objective value of primal CIP solution w.r.t. original problem, or current LP/pseudo objective value
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREETRANS
 */
SCIP_EXPORT
SCIP_Real SCIPgetSolOrigObj(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol                 /**< primal solution, or NULL for current LP/pseudo objective value */
   );

/** returns transformed objective value of primal CIP solution, or transformed current LP/pseudo objective value
 *
 *  @return transformed objective value of primal CIP solution, or transformed current LP/pseudo objective value
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREETRANS
 */
SCIP_EXPORT
SCIP_Real SCIPgetSolTransObj(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol                 /**< primal solution, or NULL for current LP/pseudo objective value */
   );

/** recomputes the objective value of an original solution, e.g., when transferring solutions
 *  from the solution pool (objective coefficients might have changed in the meantime)
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_SOLVING
 *
 */
SCIP_EXPORT
SCIP_RETCODE SCIPrecomputeSolObj(
   SCIP*                 scip,
   SCIP_SOL*             sol
   );

/** maps original space objective value into transformed objective value
 *
 *  @return transformed objective value
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 */
SCIP_EXPORT
SCIP_Real SCIPtransformObj(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_Real             obj                 /**< original space objective value to transform */
   );

/** maps transformed objective value into original space
 *
 *  @return objective value into original space
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 */
SCIP_EXPORT
SCIP_Real SCIPretransformObj(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_Real             obj                 /**< transformed objective value to retransform in original space */
   );

/** gets clock time, when this solution was found
 *
 *  @return clock time, when this solution was found
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREETRANS
 */
SCIP_EXPORT
SCIP_Real SCIPgetSolTime(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol                 /**< primal solution */
   );

/** gets branch and bound run number, where this solution was found
 *
 *  @return branch and bound run number, where this solution was found
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREETRANS
 */
SCIP_EXPORT
int SCIPgetSolRunnum(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol                 /**< primal solution */
   );

/** gets node number of the specific branch and bound run, where this solution was found
 *
 *  @return node number of the specific branch and bound run, where this solution was found
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREETRANS
 */
SCIP_EXPORT
SCIP_Longint SCIPgetSolNodenum(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol                 /**< primal solution */
   );

/** gets heuristic, that found this solution (or NULL if it's from the tree)
 *
 *  @return heuristic, that found this solution (or NULL if it's from the tree)
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREETRANS
 */
SCIP_EXPORT
SCIP_HEUR* SCIPgetSolHeur(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol                 /**< primal solution */
   );

/** returns whether two given solutions are exactly equal
 *
 *  @return returns whether two given solutions are exactly equal
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREETRANS
 */
SCIP_EXPORT
SCIP_Bool SCIPareSolsEqual(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol1,               /**< first primal CIP solution */
   SCIP_SOL*             sol2                /**< second primal CIP solution */
   );

/** adjusts solution values of implicit integer variables in handed solution. Solution objective value is not
 *  deteriorated by this method.
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPadjustImplicitSolVals(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal CIP solution */
   SCIP_Bool             uselprows           /**< should LP row information be considered for none-objective variables */
   );

/** outputs non-zero variables of solution in original problem space to the given file stream
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre In case the solution pointer @p sol is NULL (askinking for the current LP/pseudo solution), this method can be
 *       called if @p scip is in one of the following stages:
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *
 *  @pre In case the solution pointer @p sol is @b not NULL, this method can be called if @p scip is in one of the
 *       following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 */
SCIP_EXPORT
SCIP_RETCODE SCIPprintSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal solution, or NULL for current LP/pseudo solution */
   FILE*                 file,               /**< output file (or NULL for standard output) */
   SCIP_Bool             printzeros          /**< should variables set to zero be printed? */
   );

/** outputs non-zero variables of solution in transformed problem space to file stream
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 */
SCIP_EXPORT
SCIP_RETCODE SCIPprintTransSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal solution, or NULL for current LP/pseudo solution */
   FILE*                 file,               /**< output file (or NULL for standard output) */
   SCIP_Bool             printzeros          /**< should variables set to zero be printed? */
   );

/** outputs discrete variables of solution in original problem space to the given file stream
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if @p scip is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 */
SCIP_EXPORT
SCIP_RETCODE SCIPprintMIPStart(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal solution */
   FILE*                 file                /**< output file (or NULL for standard output) */
   );

/** returns dual solution value of a constraint */
SCIP_EXPORT
SCIP_RETCODE SCIPgetDualSolVal(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONS*            cons,               /**< constraint for which the dual solution should be returned */
   SCIP_Real*            dualsolval,         /**< pointer to store the dual solution value */
   SCIP_Bool*            boundconstraint     /**< pointer to store whether the constraint is a bound constraint (or NULL) */
   );

/** check whether the dual solution is available
 *
 * @note This is used when calling \ref SCIPprintDualSol()
 *
 * @return is dual solution available?
 *
 * @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_SOLVED
 */
SCIP_EXPORT
SCIP_Bool SCIPisDualSolAvailable(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_Bool             printreason         /**< print warning message if dualsol is not available? */
   );

/** outputs dual solution from LP solver to file stream
 *
 *  @note This only works if no presolving has been performed, which can be checked by calling method \ref
 *        SCIPhasPerformedPresolve().
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_SOLVED
 */
SCIP_EXPORT
SCIP_RETCODE SCIPprintDualSol(
   SCIP*                 scip,               /**< SCIP data structure */
   FILE*                 file,               /**< output file (or NULL for standard output) */
   SCIP_Bool             printzeros          /**< should variables set to zero be printed? */
   );


/** outputs non-zero variables of solution representing a ray in original problem space to file stream
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 */
SCIP_EXPORT
SCIP_RETCODE SCIPprintRay(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal solution representing ray */
   FILE*                 file,               /**< output file (or NULL for standard output) */
   SCIP_Bool             printzeros          /**< should variables set to zero be printed? */
   );

/** gets number of feasible primal solutions stored in the solution storage in case the problem is transformed;
 *  in case the problem stage is SCIP_STAGE_PROBLEM, the number of solution in the original solution candidate
 *  storage is returned
 *
 *  @return number of feasible primal solutions stored in the solution storage in case the problem is transformed; or
 *          number of solution in the original solution candidate storage if the problem stage is SCIP_STAGE_PROBLEM
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 */
SCIP_EXPORT
int SCIPgetNSols(
   SCIP*                 scip                /**< SCIP data structure */
   );

/** gets array of feasible primal solutions stored in the solution storage in case the problem is transformed; in case
 *  if the problem stage is in SCIP_STAGE_PROBLEM, it returns the number array of solution candidate stored
 *
 *  @return array of feasible primal solutions
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 */
SCIP_EXPORT
SCIP_SOL** SCIPgetSols(
   SCIP*                 scip                /**< SCIP data structure */
   );

/** gets best feasible primal solution found so far if the problem is transformed; in case the problem is in
 *  SCIP_STAGE_PROBLEM it returns the best solution candidate, or NULL if no solution has been found or the candidate
 *  store is empty;
 *
 *  @return best feasible primal solution so far
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 */
SCIP_EXPORT
SCIP_SOL* SCIPgetBestSol(
   SCIP*                 scip                /**< SCIP data structure */
   );

/** outputs best feasible primal solution found so far to file stream
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_INIT
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREE
 */
SCIP_EXPORT
SCIP_RETCODE SCIPprintBestSol(
   SCIP*                 scip,               /**< SCIP data structure */
   FILE*                 file,               /**< output file (or NULL for standard output) */
   SCIP_Bool             printzeros          /**< should variables set to zero be printed? */
   );

/** outputs best feasible primal solution found so far in transformed variables to file stream
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_INIT
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREE
 */
SCIP_EXPORT
SCIP_RETCODE SCIPprintBestTransSol(
   SCIP*                 scip,               /**< SCIP data structure */
   FILE*                 file,               /**< output file (or NULL for standard output) */
   SCIP_Bool             printzeros          /**< should variables set to zero be printed? */
   );

/** try to round given solution
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIProundSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal solution */
   SCIP_Bool*            success             /**< pointer to store whether rounding was successful */
   );

/** retransforms solution to original problem space
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMING
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *       - \ref SCIP_STAGE_EXITSOLVE
 *       - \ref SCIP_STAGE_FREETRANS
 */
SCIP_EXPORT
SCIP_RETCODE SCIPretransformSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol                 /**< primal CIP solution */
   );

/** reads a given solution file
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPreadSol(
   SCIP*                 scip,               /**< SCIP data structure */
   const char*           filename            /**< name of the input file */
   );

/** reads a given solution file and store the solution values in the given solution pointer
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPreadSolFile(
   SCIP*                 scip,               /**< SCIP data structure */
   const char*           filename,           /**< name of the input file */
   SCIP_SOL*             sol,                /**< solution pointer */
   SCIP_Bool             xml,                /**< true, iff the given solution in written in XML */
   SCIP_Bool*            partial,            /**< pointer to store if the solution is partial */
   SCIP_Bool*            error               /**< pointer store if an error occured */
   );

/** adds feasible primal solution to solution storage by copying it
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_FREETRANS
 *
 *  @note Do not call during propagation, use heur_trysol instead.
 */
SCIP_EXPORT
SCIP_RETCODE SCIPaddSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal CIP solution */
   SCIP_Bool*            stored              /**< stores whether given solution was good enough to keep */
   );

/** adds primal solution to solution storage, frees the solution afterwards
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_FREETRANS
 *
 *  @note Do not call during propagation, use heur_trysol instead.
 */
SCIP_EXPORT
SCIP_RETCODE SCIPaddSolFree(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL**            sol,                /**< pointer to primal CIP solution; is cleared in function call */
   SCIP_Bool*            stored              /**< stores whether given solution was good enough to keep */
   );

/** adds current LP/pseudo solution to solution storage
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPaddCurrentSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_HEUR*            heur,               /**< heuristic that found the solution */
   SCIP_Bool*            stored              /**< stores whether given solution was good enough to keep */
   );

/** checks solution for feasibility; if possible, adds it to storage by copying
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_SOLVING
 *
 *  @note Do not call during propagation, use heur_trysol instead.
 */
SCIP_EXPORT
SCIP_RETCODE SCIPtrySol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal CIP solution */
   SCIP_Bool             printreason,        /**< Should all reasons of violations be printed? */
   SCIP_Bool             completely,         /**< Should all violations be checked if printreason is true? */
   SCIP_Bool             checkbounds,        /**< Should the bounds of the variables be checked? */
   SCIP_Bool             checkintegrality,   /**< Has integrality to be checked? */
   SCIP_Bool             checklprows,        /**< Do constraints represented by rows in the current LP have to be checked? */
   SCIP_Bool*            stored              /**< stores whether given solution was feasible and good enough to keep */
   );

/** checks primal solution; if feasible, adds it to storage; solution is freed afterwards
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_SOLVING
 *
 *  @note Do not call during propagation, use heur_trysol instead.
 */
SCIP_EXPORT
SCIP_RETCODE SCIPtrySolFree(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL**            sol,                /**< pointer to primal CIP solution; is cleared in function call */
   SCIP_Bool             printreason,        /**< Should all reasons of violations be printed? */
   SCIP_Bool             completely,         /**< Should all violations be checked if printreason is true? */
   SCIP_Bool             checkbounds,        /**< Should the bounds of the variables be checked? */
   SCIP_Bool             checkintegrality,   /**< Has integrality to be checked? */
   SCIP_Bool             checklprows,        /**< Do constraints represented by rows in the current LP have to be checked? */
   SCIP_Bool*            stored              /**< stores whether solution was feasible and good enough to keep */
   );

/** checks current LP/pseudo solution for feasibility; if possible, adds it to storage
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_SOLVING
 */
SCIP_EXPORT
SCIP_RETCODE SCIPtryCurrentSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_HEUR*            heur,               /**< heuristic that found the solution */
   SCIP_Bool             printreason,        /**< Should all reasons of violations be printed? */
   SCIP_Bool             completely,         /**< Should all violations be checked if printreason is true? */
   SCIP_Bool             checkintegrality,   /**< Has integrality to be checked? */
   SCIP_Bool             checklprows,        /**< Do constraints represented by rows in the current LP have to be checked? */
   SCIP_Bool*            stored              /**< stores whether given solution was feasible and good enough to keep */
   );

/** returns all partial solutions
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 */
SCIP_EXPORT
SCIP_SOL** SCIPgetPartialSols(
   SCIP*                 scip                /**< SCIP data structure */
   );

/** returns number of partial solutions
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 */
int SCIPgetNPartialSols(
   SCIP*                 scip                /**< SCIP data structure */
   );

/** checks solution for feasibility without adding it to the solution store
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 */
SCIP_EXPORT
SCIP_RETCODE SCIPcheckSol(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal CIP solution */
   SCIP_Bool             printreason,        /**< Should all reasons of violations be printed? */
   SCIP_Bool             completely,         /**< Should all violations be checked if printreason is true? */
   SCIP_Bool             checkbounds,        /**< Should the bounds of the variables be checked? */
   SCIP_Bool             checkintegrality,   /**< Has integrality to be checked? */
   SCIP_Bool             checklprows,        /**< Do constraints represented by rows in the current LP have to be checked? */
   SCIP_Bool*            feasible            /**< stores whether given solution is feasible */
   );

/** checks solution for feasibility in original problem without adding it to the solution store;
 *  this method is used to double check a solution in order to validate the presolving process
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_PROBLEM
 *       - \ref SCIP_STAGE_TRANSFORMED
 *       - \ref SCIP_STAGE_INITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_EXITPRESOLVE
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_INITSOLVE
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 */
SCIP_EXPORT
SCIP_RETCODE SCIPcheckSolOrig(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal CIP solution */
   SCIP_Bool*            feasible,           /**< stores whether given solution is feasible */
   SCIP_Bool             printreason,        /**< should the reason for the violation be printed? */
   SCIP_Bool             completely          /**< Should all violations be checked if printreason is true? */
   );

/** update integrality violation of a solution */
SCIP_EXPORT
void SCIPupdateSolIntegralityViolation(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal CIP solution */
   SCIP_Real             absviol             /**< absolute violation */
   );

/** update bound violation of a solution */
SCIP_EXPORT
void SCIPupdateSolBoundViolation(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal CIP solution */
   SCIP_Real             absviol,            /**< absolute violation */
   SCIP_Real             relviol             /**< relative violation */
   );

/** update LP row violation of a solution */
SCIP_EXPORT
void SCIPupdateSolLPRowViolation(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal CIP solution */
   SCIP_Real             absviol,            /**< absolute violation */
   SCIP_Real             relviol             /**< relative violation */
   );

/** update constraint violation of a solution */
SCIP_EXPORT
void SCIPupdateSolConsViolation(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal CIP solution */
   SCIP_Real             absviol,            /**< absolute violation */
   SCIP_Real             relviol             /**< relative violation */
   );

/** update LP row and constraint violations of a solution */
SCIP_EXPORT
void SCIPupdateSolLPConsViolation(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< primal CIP solution */
   SCIP_Real             absviol,            /**< absolute violation */
   SCIP_Real             relviol             /**< relative violation */
   );

/** allow violation updates */
SCIP_EXPORT
void SCIPactivateSolViolationUpdates(
   SCIP*                 scip                /**< SCIP data structure */
   );

/** disallow violation updates */
SCIP_EXPORT
void SCIPdeactivateSolViolationUpdates(
   SCIP*                 scip                /**< SCIP data structure */
   );

/** return whether a primal ray is stored that proves unboundedness of the LP relaxation
 *
 *  @return return whether a primal ray is stored that proves unboundedness of the LP relaxation
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 */
SCIP_EXPORT
SCIP_Bool SCIPhasPrimalRay(
   SCIP*                 scip                /**< SCIP data structure */
   );

/** gets value of given variable in primal ray causing unboundedness of the LP relaxation;
 *  should only be called if such a ray is stored (check with SCIPhasPrimalRay())
 *
 *  @return value of given variable in primal ray causing unboundedness of the LP relaxation
 *
 *  @pre This method can be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 */
SCIP_EXPORT
SCIP_Real SCIPgetPrimalRayVal(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_VAR*             var                 /**< variable to get value for */
   );

/** updates the primal ray thats proves unboundedness
 *
 *  @return \ref SCIP_OKAY is returned if everything worked. Otherwise a suitable error code is passed. See \ref
 *          SCIP_Retcode "SCIP_RETCODE" for a complete list of error codes.
 *
 *  @pre This method can be called if @p scip is in one of the following stages:
 *       - \ref SCIP_STAGE_PRESOLVING
 *       - \ref SCIP_STAGE_PRESOLVED
 *       - \ref SCIP_STAGE_SOLVING
 *       - \ref SCIP_STAGE_SOLVED
 *
 *  See \ref SCIP_Stage "SCIP_STAGE" for a complete list of all possible solving stages.
 */
SCIP_EXPORT
SCIP_RETCODE SCIPupdatePrimalRay(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             primalray           /**< the new primal ray */
   );

/**@} */

#ifdef __cplusplus
}
#endif

#endif